Home›Exterior Signs›Post and Panel Signs
Post and Panel Signs Edmonton
Post and Panel Signs in Edmonton for Businesses, Plazas, and Commercial Parks
Post and panel signs are one of the most versatile and practical freestanding sign formats available. Easy to install, cost-effective to maintain, and straightforward to update when tenants or messaging change. A reliable and professional choice for commercial properties, multi-tenant plazas, and office parks across Edmonton.
How Post and Panel Signs Work
Posts, Panels, and Easy Updates
The system is straightforward: steel or aluminum posts are set in concrete foundations in the ground, and sign panels are attached between or across the posts. Panels can be rigid aluminum composite, aluminum sheet, acrylic, or printed substrates depending on the application. Single-panel configurations display a single sign face. Multi-panel stacked configurations allow multiple tenants or messages on the same structure.
The key advantage over monument signs is updateability. When a tenant changes or messaging needs to be revised, the panel is replaced rather than the entire sign. Replacing one panel takes less than an hour. This makes post and panel signs a practical long-term investment for properties where change is expected.
Common Applications
Four Property Types. One Practical Sign Format.
Post and panel signs work across a wide range of commercial property types. The format adapts to single tenants and large multi-building developments alike.
01
Multi-Tenant Plaza Signs
Commercial plazas use a post and panel sign at the property entrance to list all tenants with their suite numbers. Panels are sized consistently in a vertical stack. When a tenant leaves or a new one arrives, only the relevant panel needs to be replaced. We produce both the initial structure and replacement panels on an ongoing basis.
02
Office Park and Industrial Development Signs
Post and panel signs at property entrances and internal decision points identify the property, list tenants, and direct visitors to the right building or unit. The format scales well from a two-tenant property to a large multi-building campus.
03
Single Business Identification Signs
For businesses without the budget or location requirements for a monument or pylon sign, a single-panel post and panel sign is a clean and professional alternative. It places the business name, logo, and address at road level in a format that is easy to read from a vehicle.
04
Real Estate and Development Signs
Construction and development projects use post and panel signs for property identification, project branding, and regulatory compliance signage. Typically temporary in nature and removed at project completion.
05
Illuminated Configurations
We incorporate LED lighting into post and panel structures via internally illuminated panel cabinets, external spotlights mounted to the posts, or individual illuminated panel faces. Illuminated configurations require an electrical permit. We advise on the best approach for your location.
Multi-Tenant Property?
We Handle Initial Build and Ongoing Panels
We produce the original structure and supply replacement panels as tenants change. No need to coordinate between vendors for ongoing maintenance.
Materials, Structure, and Permits
Built for 15 Years. Panels Updated as Needed.
We specify structural components, panel materials, and foundations matched to the sign size, site conditions, and permit requirements of each installation.
We fabricate post and panel sign structures from powder-coated steel or aluminum, which resist corrosion and maintain their appearance through Edmonton’s full seasonal range. Sign panels are produced from aluminum composite material or aluminum sheet with UV-stable printed graphics. The print is laminated for abrasion and weather resistance, with quality laminated prints lasting 5 to 7 years outdoors.
Post foundations are sized appropriately for the sign height and panel area to meet wind load requirements. We specify foundation depth based on the sign dimensions and the soil conditions at the installation site. Structural components typically last 15 or more years with minimal maintenance.
Freestanding post and panel signs in Edmonton require a development permit under the City of Edmonton Zoning Bylaw. Requirements depend on sign height, panel area, and zoning. We manage the permit application as part of every project.
Powder-Coated Steel and Aluminum Posts
Corrosion-resistant structural components that maintain their appearance through Edmonton freeze-thaw cycles and UV exposure. Structural lifespan 15 or more years.
Aluminum Composite Panels
Rigid, lightweight, and dimensionally stable. UV-stable printed graphics laminated for abrasion and weather resistance. Panel graphics last 5 to 7 years outdoors.
Engineered Foundations
Foundation depth and post sizing specified based on sign height, panel area, and wind load requirements. Soil conditions assessed at the installation site.
Development Permit
Required for permanent freestanding post and panel signs in Edmonton. We manage the application and follow up through the review process as part of the project.
Installation and Ongoing Service
Installed by Our Crew. Replacement Panels on Request.
Our installation crew handles post setting, concrete foundation work, panel installation, and site cleanup. For illuminated configurations, we coordinate the electrical permit and perform the licensed electrical connection. We work on commercial properties across Edmonton and the surrounding area.
We produce replacement panels on request and can match the original specifications of a sign structure we built or one built by another company. For multi-tenant properties, we are a practical ongoing supplier for panel changes as tenants turn over.
For project inquiries, call us at 780-540-9540 or use the quote request form. We serve Edmonton, Spruce Grove, St. Albert, Stony Plain, Sherwood Park, and Leduc. Our shop is at 18118 107th Avenue, Edmonton.
FAQ
Frequently Asked Questions
Common questions about post and panel signs from Edmonton businesses and property owners.
How easy is it to update the panels on a post and panel sign?
Straightforward. Panels are designed to be removed and replaced without structural work. For a multi-tenant directory, replacing one panel takes less than an hour. We produce replacement panels on request and can match the original specifications of an existing sign structure we built or one built by another company.
What is the difference between a post and panel sign and a monument sign?
A post and panel sign uses visible posts with panels mounted between or across them, typically with open space between the panel and the ground. A monument sign sits at ground level with a solid base, giving it a more permanent, architectural appearance. Monument signs cost more and are harder to update. Post and panel signs are more cost-effective and more practical for multi-tenant properties where panel changes are expected.
Can a post and panel sign be illuminated?
Yes. We can incorporate LED lighting into post and panel structures in several ways: internally illuminated panel cabinets, external spotlights mounted to the posts, and individual illuminated panel faces. Illuminated configurations require an electrical permit in Edmonton. We advise on the most practical illumination approach for your sign type and location.
How many panels can be stacked on a single post and panel structure?
The number of panels depends on the post height, panel size, and wind load calculations for the structure. A typical multi-tenant plaza sign accommodates 4 to 8 tenant panels on a standard structure. For properties with more tenants or larger panels, we design a structure with appropriate post sizing and foundation depth to handle the load.