Home›Custom Signs›LED Signs
LED Signs Edmonton
LED Signs in Edmonton for Businesses and Commercial Properties
LED illumination is the standard for commercial signs in Edmonton. It replaced fluorescent technology across virtually all sign types because it outperforms on every practical measure: energy consumption, lifespan, cold-weather performance, colour consistency, and maintenance frequency. All illuminated signs we produce use LED technology.
Why LED Over Fluorescent in Edmonton
Consistent Output in Winter. 11 Years Before First Replacement.
The performance gap between LED and fluorescent is especially relevant in Edmonton’s climate. Fluorescent tubes lose significant output at low temperatures, which means a fluorescent sign in an Edmonton winter is noticeably dimmer than the same sign in summer. LED modules maintain consistent output down to well below freezing: your sign performs the same in January as in July.
LED modules are rated for 50,000 or more hours of operation, compared to 10,000 to 15,000 hours for typical fluorescent tubes. At 12 hours of operation per day, that is roughly 11 years of LED operation before the first module replacement is expected, versus 2 to 3 years for fluorescent. LED signs also consume 50 to 80 percent less energy than fluorescent alternatives producing equivalent light output.
LED Sign Types We Produce
Five LED Sign Formats. Cold-Weather Rated Throughout.
Every illuminated sign we produce uses LED technology. The right format depends on your application, building, and budget.
01
LED Channel Letters
Individually fabricated three-dimensional letters with LED modules inside each housing. Front-lit glow through a coloured acrylic face. Halo-lit push light out the back to create a glow around each letter. Both use LED modules rated for cold-weather operation for Edmonton winters.
02
Illuminated Cabinet Signs
Aluminum cabinet enclosures with acrylic or polycarbonate faces, illuminated from within by LED strip or module arrays. Even illumination across the face, significantly less power than fluorescent cabinets. We fabricate in-house and produce LED retrofit kits for existing fluorescent cabinets.
03
LED Neon-Style Signs
Flexible LED strip formed to letter or graphic shapes, producing an effect similar to traditional neon at lower cost, lower power, and without glass fragility. Popular for interior branding, hospitality, and retail displays. Available in any colour, dimmable.
04
Electronic Message Display (EMD) Signs
Full-colour LED display panels integrated into freestanding or building-mounted sign structures. Change messages, display prices, and promote specials from a remote management system. Subject to City of Edmonton bylaw regulations on brightness, pixel pitch, and message hold time.
05
Backlit LED Panels and Light Boxes
LED-illuminated flat panel displays for menu boards, reception areas, retail display, and interior branding. Even, consistent illumination across large-format graphics without the hot spots or dimming of older fluorescent lightbox technology.
Existing Fluorescent Sign?
LED Retrofit Is the Cost-Effective Solution
We assess existing signs and produce LED retrofit kits matched to the sign’s internal dimensions. Retrofit extends sign life and eliminates ongoing fluorescent lamp replacement costs.
Performance and Longevity
11 Years at 12 Hours Per Day. 50-80% Less Energy.
LED outperforms fluorescent on every practical measure relevant to Edmonton commercial sign operation.
LED modules used in commercial signs are rated for 50,000 hours or more of operation. At 12 hours per day, this equates to approximately 11 years before the first module replacements are expected. Power supplies typically have a shorter service life than the LEDs themselves and are the more common maintenance item after several years of operation.
LED signs typically consume 50 to 80 percent less energy than fluorescent alternatives producing equivalent light output. For businesses with large illuminated cabinet signs or multiple channel letter sets running 12 or more hours per day, the energy saving is a meaningful reduction in operating cost over the sign’s service life.
Any illuminated sign installation or retrofit involving electrical work requires an electrical permit under Alberta’s Safety Codes Act. Pivotal Signs manages the electrical permit and performs the electrical connection in-house as part of every LED sign project.
50,000 Hour LED Lifespan
Approximately 11 years at 12 hours per day. Power supplies are the more common maintenance item after several years. LED modules themselves rarely fail before the power supply.
50-80% Less Energy
Compared to fluorescent alternatives producing equivalent output. Meaningful operating cost reduction for signs running 12 or more hours per day year-round.
Consistent in Edmonton Winters
LED maintains full brightness output at temperatures well below freezing. Fluorescent loses significant output in cold. Your sign looks the same in January as in July.
LED Retrofit Service
We assess existing fluorescent signs and produce LED retrofit kits matched to the sign’s internal dimensions. More cost-effective than full replacement, extends sign life.
Fabrication and Installation
Fabricated In-House. Electrical Permit Managed.
We fabricate all LED sign types in-house at our Edmonton production facility. Channel letter LED modules are installed during fabrication. Cabinet sign LED arrays are sized and installed for the specific cabinet dimensions. Neon-style LED is formed and mounted to the substrate. All illuminated signs are wired to a transformer or power supply as part of fabrication.
Installation includes mounting, electrical connection, and commissioning. We manage the electrical permit required under Alberta’s Safety Codes Act and perform the licensed electrical work in-house. For LED retrofit projects on existing signs, we assess the sign, produce the retrofit kit, and install it without replacing the cabinet or channel letter structure.
For project inquiries, call us at 587-802-3185 or use the quote request form. We serve Edmonton, Spruce Grove, St. Albert, Stony Plain, Sherwood Park, and Leduc. Our shop is at 18118 107th Avenue, Edmonton.
FAQ
Frequently Asked Questions
Common questions about LED signs from Edmonton businesses.